MEDCITY PAINTING MedCity Painting
Safety

Is it safe to paint a home built before 1978?

Published October 25, 2026Updated October 25, 2026Rochester and Southeast Minnesota
A tree-lined street of older buildings with painted siding in sage, cream and slate blue.

The short answer

Homes built before 1978 may contain lead-based paint. Painting over intact paint is generally lower risk than sanding or scraping it, and under the EPA's Renovation, Repair and Painting (RRP) rule, a contractor paid to disturb lead-based paint in a pre-1978 home must be certified and follow lead-safe work practices. Ask any painter whether their firm is certified.

On this page
  1. Why 1978?
  2. What the EPA rule requires
  3. What lead-safe work practices look like
  4. How do I find out if my paint contains lead?
  5. What to ask your painter
  6. Related questions

Why 1978?

Lead-based paint was banned for use in homes in 1978 because lead dust and chips can harm health, especially for young children and pregnant women. Many Rochester-area houses were built before that, and a house that has been repainted many times can still have old lead paint under newer layers.

What the EPA rule requires

The EPA's Renovation, Repair and Painting (RRP) rule applies to paid work that disturbs painted surfaces in most housing built before 1978. In general, it covers work that disturbs more than 6 square feet of paint inside a room or more than 20 square feet outside, and it requires the contractor to be an EPA-certified firm that uses certified renovators and lead-safe work practices. The details and exceptions are on the EPA's lead pages at epa.gov/lead, so confirm the current rules there.

What lead-safe work practices look like

  • Plastic sheeting and containment to keep dust and chips in the work area.
  • No open-flame burning, no high-speed power sanding or blasting without dust controls, and no heat guns above the recommended temperature.
  • Wet scraping and wet cleaning instead of dry sweeping.
  • Cleanup with a HEPA vacuum and a check that the area is clean at the end.

How do I find out if my paint contains lead?

Home test kits, lab testing and a certified inspector or risk assessor are the usual options. Test results matter most before you scrape, sand or demolish. If your home is older, a certified firm will often assume lead is present or test first.

What to ask your painter

  1. Is your firm EPA-certified for lead-safe work?
  2. Will the work disturb painted surfaces, and how will you contain the dust?
  3. How will you clean up, and how will you verify it?
  4. Do you give homeowners the EPA lead pamphlet before starting?

Our guide on what to ask a painter before hiring has more. If you plan to do the work yourself, the EPA's lead pages explain how to protect your family.

Want a licensed local pro to take a look? Request a quote and attach a photo.

Related questions

Is painting over lead paint safe?
Painting over lead paint that is intact and in good condition is generally lower risk than disturbing it. Peeling or chipping paint needs attention first, and the work should follow lead-safe practices.
Does the rule apply if I paint my own home?
The RRP rule is aimed at paid renovation work. Owners working on their own homes are generally not covered by it, but the health risks are the same, so the lead-safe practices are still worth following.
How do I know when my house was built?
County property records usually show the year built. If you are unsure, assume an older home may have lead paint and ask your painter about their certification.
Who does the painting?
MedCity Painting connects homeowners with independent licensed partners. Work is performed and warranted by the partner, and partner license numbers are provided with every quote.

Request a quote

Ready for an honest quote?

Tell us about the project and attach a few photos. A vetted, licensed local partner follows up with a quote.