The short answer
Painting brick is possible but hard to undo, and healthy unpainted brick usually needs no paint. If you do paint, clean it, repair the mortar and let it dry first, then use a breathable masonry or mineral paint. Limewash or masonry stain are alternatives. Trapped moisture and freeze-thaw can make brick flake off.
On this page
Why do people paint brick?
Brick is tough, but it can look dated, stained or mismatched after an addition or repair. Paint is the quickest way to change a tired color, and some owners like a clean white or soft gray look. Painting is a style choice, not a need: sound, healthy brick does not require a coating to protect it.
What are the risks of painting brick in a Minnesota climate?
Brick takes in water and lets it out again. A coating that is not breathable can hold moisture inside the wall. When that water freezes and thaws through a Minnesota winter, the face of the brick can flake or pop off, which is called spalling. Peeling paint is the early sign, and the guide on why exterior paint peels explains the usual causes.
- Trapped moisture. Water that cannot escape builds up behind the paint.
- Freeze-thaw damage. Repeated cycles can break the brick surface and crumble mortar.
- Hard to reverse. Paint soaks into brick, and removing it is slow and can harm the brick.
- Ongoing upkeep. Painted brick needs touch-ups and a future repaint, where bare brick needs none.
What are the alternatives to paint?
If the goal is a fresher look, try the lighter touch first.
- Cleaning. Dirt, algae and old stains often make brick look worse than it is. A gentle wash may be all it needs.
- Limewash. A mineral wash that lets brick breathe and gives a soft, aged look.
- Masonry stain. Changes the color while leaving the texture and breathability closer to bare brick.
- Breathable masonry or mineral paint. The option to choose if you want solid color.
How is brick prepared before painting?
Prep matters more on brick than on almost any other surface.
- Clean. Remove dirt, mildew and loose material, then rinse and let the brick dry fully.
- Treat efflorescence. The white, chalky salt deposits mean moisture is moving through the wall. Brush them off and find the water source first.
- Repoint mortar. Repair cracked or crumbling joints before any coating goes on.
- Let it dry. Damp brick should not be painted. Wait for a dry spell, as covered in the best time to paint a house exterior in Minnesota.
- Test a patch. Try the product on a small, hidden area and watch how it looks and holds.
The exterior painting page covers how a typical exterior project is planned.
Is the brick already painted?
Repainting brick that is already painted is a different job. The old coat has to be sound and compatible, and flaking or sealed-in moisture needs attention first. Homes built before 1978 may have old paint that contains lead, so read the guide on painting homes built before 1978 before scraping or sanding. A local licensed pro can check the surface and say what it needs.
Thinking about your brick home? Request a quote and attach a few photos of your home. For general questions, visit the contact page.

